Installing Windows on a MAC using BOOT CAMP

This is for those who wish to dual boot their MAC with Windows. Whether you accept it or not, Windows is quite popular among the masses and the profusion of useful windows specific software forces MAC users to install it on their beasts even if they don't quite like it. Compatibility with other Windows users is another driving factor for the necessity to install Windows. Apple made this possible with their Intel transition in 2006. Boot Camp made the process very simple with its introduction along with MAC OS 10.5 (Leopard). Boot Camp has seen an upgrade to version 3 with the release of MAC OS 10.6 (Snow Leopard), with support for Windows 7. Let us go through this simple process without further delay.

Enable backspace to take you to the previous page in firefox

For a change, a small tip for people who use keyboard shortcuts for navigation in the web browser. I've been using this feature in IE and Safari. I recently noticed that this doesn't work by default in firefox (Ubuntu). To enable this feature, open a firefox window and type 'about:config' (without the quotes). Search for 'backspace' in the filter tab. The only entry for backspace will be 'browser.backspace_action'. Right click on it and modify the entry to '0' from the default value. There you go. Now, you can use backspace to go to the previous page/s you were viewing.

Latex Tutorial: Lecture 1

OK guys. I've decided to write a series of blogs on how to start using LaTeX. This is for people who are willing to make a switch from MS-WORD/Open-Office/Pages to LaTeX to prepare their complex documents. The reason I use the word 'Complex' will be evident either later in the post or some other post that I will write later. First up, I'll cover the installation part on 3 Operating Systems (Mac OS X, Windows and Linux). This will be equivalent to overcoming a major hurdle for newbies (That's how I felt when I began learning LaTeX). Installing is not difficult, but a bit confusing. Hence, I've decided to dedicate a complete post to that. I plan to go in a step-by-step manner on how LaTeX works. Firstly, I'll start off by showing y'all a picture I came across on the Internet. This picture summarizes the need to make the switch when preparing complex documents.

The most important advantage of LaTeX is that you need not worry about formatting the document. Globally specified, the formatting remains the same throughout the document. Just worry about the CONTENT. Preparing complex documents like, say a Book, becomes a tedious task once you have to keep adjusting the position of text relative to the figures and tables in the document. You end up spending more time formatting the document than adding content to it. More on the advantages sometime later. My attempt here is to encourage more people to use LaTeX. This post is not to condemn or highlight the short-comings of Word processors. Every person has their own comfort zone and being a tech geek, I would prefer preparing complex documents in LaTeX. For people who are not tech-savvy, better stick to word processors. So, decide if you are willing to give LaTeX a try before continuing to read further.

Speed dial websites on firefox

Firefox has a built-in feature to speed-dial websites. The trick here is to bookmark a web-page and attach a keyword to it. There's a difference between attaching a 'tag' and 'keyword'.

So, once you decide upon a list of websites that you would like to speed dial, open the 'Organize Bookmarks' link by holding Ctrl+Shift+O else open it via. the Bookmarks tab.

Select 'New bookmark'. A screenshot is attached, where-in I have added the HDFC bank login with the keyword 'HDFC'. Note that the keywords are case-insensitive. So, even if I type 'hdfc' instead of 'HDFC' (note the case), firefox would open-up the login for HDFC bank. Even though this is a simple technique, not many are aware of this. The good thing is you can even have numbers as a keyword for a website.

If you decide to export your bookmarks to another browser, say 'Google Chrome' for example, you would not lose out on this feature. I haven't tried it on Safari or Internet Explorer so far. Tell me if it works for you!

How to make the headphone socket work with ubuntu 9.10 and Macbook 2,1

I've been having this issue for sometime now and never realized that the solution is pretty simple. Whenever I plug-in a headphone into the headphone-socket on my macbook running Ubuntu 9.10, it never worked. Assuming that there was some problem with the headphone I continued using the speakers. However, the headphone worked on my other OSs.

One fine day, curiosity got the better of me and I wanted to sort this out. It didn't take me a long time to find a solution. This issue was already raised in the Ubuntu forums and has worked for many people. Click here to find out.

Just run the command 'alsamixer' (without the quotes) in terminal and press the key 'm' (without the quotes again). The default setting for the headphone jack is muted and one just has to unmute it.

Make Safari open new windows in tabs

Here's a small workaround to make safari open new links in tabs. Just copy-paste the following command in terminal. Restart the browser and there you go.

defaults write com.apple.Safari TargetedClicksCreateTabs -bool true

Note that this trick is for Safari 4 and below versions. In Safari 5, there's an 
option in the preferences window which allows one to change the setting such 
that new pages always open in new tabs. A screenshot is attached.

I know I haven't been writing enough. I promise to share my views and post my latest tweaks more frequently. I guess even small posts aren't that bad! 

Converting VISIO images to EPS

Sorry for being offline for so long. My triple-boot experiment has been a success. Now I run Snow Leopard, Ubuntu 9.10 and Windows XP. I'll write about this experiment sometime later. This week, I have something more interesting (according to me ;) )
Fortunately, i got an idea for my next blog entry this weekend. I had to convert a few VISIO images to EPS (Encapsulated Post Script) to attach them to report, to be prepared in latex.

For those of you who don't know about EPS format, EPS is a scalable vector format. Basically, you can scale the image and make it smaller/larger without losing its quality. EPS images are frequently used in preparing latex documents.

According to me, the best way to convert a VISIO file to an EPS file is as follows.

Pre-requisite: Install open-office

Step 1: Save the VISIO file in .wmf (Windows Meta File) format.
Step 2: Open this file using Openoffice Draw (Equivalent to VISIO, but open source).
Step 3: Right Click on the image and say "Save as Picture...".
Step 4: Change the type to EPS.

Since Openoffice is available on the 3 platforms I use, it makes my job a lot more simpler. I tried converting the ".wmf" file in both ubuntu and windows using draw and it worked like a charm. There was absolutely no difference in the quality of the output images.

Here are a couple of screenshots.










I also came across a wmf2eps converter. It's available here

The pleasure you obtain when you do something all by yourself is immense and I would like to stick to my methodology. During this exercise of getting my VISIO images converted to EPS, I came across various printer drivers that allow one to print the image as a PS(post-script) or EPS. A major glitch in this process is that the quality of the final image is not guaranteed to be as good as the original one. I also understand that VISIO2002 allowed one to save images in EPS format.

I guess this would be really helpful for those looking to convert their VISIO images to .eps. Be on the lookout for such tips and tricks.

CYA

Solution for kernel panic in Ubuntu 9.10

Ever since i started using linux (Ubuntu 6.06), I've always wanted to explore its features. As a tech-geek, it is imperative for anyone to try out new things and I was no exception. Back then, one had to manually mount windows partitions by modifying the 'fstab' file. I wouldn't say that it was an easy task, but I was willing to take such risks because I had a spare 40GB drive on my desktop. Any experiment would be done only on the 40 GB drive and this gave me a free hand to wipe out the HD if something went wrong.

Import tables from excel to latex

Since this is my first post, I would like to write something that I have been obsessed with for the past few months........LATEX (yes, you read it right). Ever since my supervisor asked me to write a technical paper to be submitted to a journal in Latex, I've been intrigued with what Latex can do.

I got hold of some excellent guides to start off with, and since Latex is open source, there is abundant material available on the internet. After typesetting the initial part of my document, I had to add results that I obtained after simulation. All my results were in tables (numerical values), stored in an excel sheet. I found it really painful to enter the contents of the table one by one, separated by ampersands (&). I did this exercise for small tables, but how was I going to do this for a table of size 30x5 ?

I googled "Excel to Latex" and came across this very useful macro that provided me the code to paste in the latex editor, the contents of the table. All I had to do was install the macro and run it, after highlighting the table that I wanted to export.

I told my supervisor about my latest discovery and he was surprised to know about the availability of this useful tool. He confessed to me that as a student he used to enter the values manually.

Since I use Latex on UBUNTU (my favourite distro), I used the macro calc2latex. I've tried the excel2latex macro as well on office2003 and it worked satisfactorily. One of my colleagues had office2007 installed on his laptop and the macro gave some weird error. So, make sure you run office2003 for the macro to work.

The macro and the installation instructions are given here (linux) and here (windows).

Be on the lookout for such interesting experiences of my experiments with latex and of course ubuntu, and MAC OS X because I have a second generation MACBOOK (triple booting with MAC OS X (leopard), Ubuntu 8.04 LTS and WIN XP).

This will not only help me archive my work, but will also be useful to many others.

See you'll soon.